Maintenance Log List Screen In Operator Maintenance Mode; Display; Control Keys - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Basic Operation > Maintenance Log List Screen in Operator Maintenance Mode > Control Keys
Maintenance Log List Screen in Operator Maintenance
Mode
Press [Maintenance Log] in operator maintenance basic screen to show the maintenance log
list.
In the maintenance log list, the maintenance works in replacing/cleaning parts are listed. A
blank list is shown when no history found.
CAUTION:
This is the screen when [Maintenance Log] is pressed.
1 Initial Setup > Basic Operation > Maintenance Log List Screen in Operator Maintenance Mode > Control Keys

■ Display

Item No.
Replacement/
Cleaning Icons
Maintenance
Date of Counter Cleared
Count
NOTE:
The maintenance history for all replacement parts is shown in the maintenance log list
regardless of the display/non-display setting.
"NOTE: Setting of the parts shown in the lists"(page 1-5).

■ Control Keys

Names of Key
F-1-11
Print List
CAUTION:
If [To Rplcmt./Cleaning] is pressed immediately after pressing [Print List], wait time of
approx. 2 minutes is required in order to protect the device.
Items
8 digits in characters and numbers (format XXX-XXXX)
Replacement icon
Cleaning icon
Max. 34 single byte characters (overflow will be rounded)
Year / Month / Day (For Japan)
Month / Day / Year (For U.S.A.)
Day / Month / Year (For Europe)
8 digit numbers (the count when cleared)
Function
Press [Print List] to print the maintenance log report.
This key is disabled (shaded) when A4 or larger size paper is not loaded or
it is in Replacement/Cleaning mode.
1-7
Contents
T-1-5
T-1-6
1-7