Changing Password; Initialization Of The Password - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Adjustments/Settings > Management Setting Menu Screen > Initialization of the Password

■ Changing Password

The password to enter Operator Maintenance Mode can be changed.
1) Press [Change Password] on Management Setting Menu screen.
-> Change Password screen is displayed.
2) Enter the password.
NOTE:
Only 7-digit numbers can be set for the password.
3) Press [Confirm], and reenter the password for confirmation.
4) Press [OK].
1 Initial Setup > Adjustments/Settings > Management Setting Menu Screen > Initialization of the Password

■ Initialization of the Password

It is possible to initialize the password for entering operator maintenance mode.
1) Press [Settings/Registration] > [Adjustment/Maintenance] > [Operator Maintenance].
F-1-70
2) Press [Initialize Operator Maintenance Password].
F-1-71
-> The message screen for confirming initialization of the password will appear.
1-38
F-1-72
F-1-73
1-38