Advertisement
3.
Loosen the flange locknut (3/8 inch) and
capscrew (3/8 x 3-7/8 inches) in the height-of-cut
bracket
(Figure
4).
Figure 4
1. Side plate
2. Flange locknut (3/8 inch)
3. Capscrew (3/8 x 3-7/8
inches)
4.
Remove the height-of-cut bracket from the
side plate, and remove the roller from the
height-of-cut brackets.
Note:
Retain the front roller.
Discard the flange locknut (3/8 inch), capscrew
(3/8 x 3-7/8 inches), and height-of-cut bracket.
5.
Repeat steps
2
and
the cutting unit, and remove the height-of-cut
bracket form the side plate.
4. Height-of-cut bracket
5. Shaft (roller)
3
at the other side or
Removing the Support Rod
Remove the 2 flange-head bolts and washers securing
the support rod, and remove the support rod
5).
Note:
Discard the support rod and flange-head bolts.
g356733
1. Flange-head bolts (2)
2. Support rod
5
(Figure
Figure 5
3. Washer (2)
g192295
Advertisement
