Canon B160 User Manual page 122

Message
CARTRIDGE JAMMED
CHANGE CARTRIDGE
CHECK DOCUMENT
CHECK PAPER SIZE
CHECK PRINTER
Error Code Cause
– The cartridge holder
cannot move. This is
normally due to a paper
jam.
– You pressed [Cartridge]
and the cartridge holder
is moving to the centre
of the fax.
The BJ cartridge is
empty or its ink may
have dried out.
#001 The document is
jammed in the Automatic
Document Feeder
(ADF).
– The size of the paper in
the multi-purpose tray
and that specified in the
PAPER SIZE setting are
different.
– There may be an
obstruction that is not
allowing the cartridge
holder mechanism to
move.
LCD messages
Action
Clear the paper jam or
whatever is obstructing
the cartridge holder and
then press [Start] and
start again. Do not
attempt to move the
cartridge holder
manually.
Wait until the cartridge
holder stops, then
replace the BJ cartridge
(see p. 9-8). When you
are finished, press
[Cartridge] and close the
printer cover. Wait for the
fax to return to standby
mode.
Clean the BJ cartridge
print head (see p. 9-8). If
the message remains on
the LCD, replace the BJ
cartridge (see p. 9-8).
The fax will then print
automatically any
documents received in
memory.
Remove the document
you are trying to send or
copy (see p. 9-2) and
start again.
Load the correct paper
size or change the
PAPER SIZE setting.
(see p. 8-5)
Check for any
obstruction (paper clip,
small object, etc.) and
also that the orange
protective cap and tape
are removed from the BJ
cartridge. Check also for
a paper jam and clear
the jam if necessary
(see p. 9-3). Then press
[Start] and start again.
9-19
9