3
Use a clean, soft, dry, lint-free cloth to
remove any ink or paper debris from the
interior of the fax (shaded area),
especially around the platen.
Be careful not to touch the BJ cartridge or its holder.
Cleaning the scanner components
K K
Follow the procedure below to periodically check and clean the scanner components.
1
Disconnect the power cord from the fax.
2
Open the operation panel partially by
gently pulling it towards you.
It only opens slightly.
4
When you are finished, close the printer
cover.
5
Reconnect the power cord.
3
While holding the operation panel open,
clean these components:
Separation guide
Scanning glass
White sheet
• Separation guide and separation roller
Wipe with a clean, soft, dry, lint-free cloth.
• White sheet and scanning glass
Wipe with a clean, soft, lint-free cloth moistened with
water, then wipe with a clean, soft, dry, lint-free cloth.
Periodic cleaning
Separation roller
9-5
9