Reports Activity Report - Canon B160 User Manual

REPORT SETTINGS
For details on accessing the settings below, see p. 8-2.
Name
TX REPORT
PRINT WITH IMAGE
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX SETTINGS
For details on accessing the settings below, see p. 8-2.
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TIME OUT
8-4
Description
Enable/disable automatic printing of the transmission report.
OUTPUT YES: Set the fax to print an activity report every time you
send a document.
PRINT ERROR ONLY: Print only when an error occurs during sending.
OUTPUT NO: Turn off the activity report feature.
When you set TX REPORT to OUTPUT YES or PRINT ERROR ONLY,
you can add to the TX report half of the first page of the document that
was being sent. This can help remind you which document was being
sent. Valid only for memory sending.
Enable/disable automatic printing of the reception report.
OUTPUT YES: Set the fax to print an activity report every time you
receive a document.
PRINT ERROR ONLY: Print only when an error occurs during
receiving.
OUTPUT NO: Turn off the activity report feature.
Enable/disable automatic printing of the activity report.
When you set ON, your fax is set to print an activity report for every 20
transactions (sending and receiving).
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling sequence.
Determine whether the fax will redial a number if it fails to get a
response on the first attempt.
Set the number of retries.
Set the period of time between redialling attempts.
Enable/disable automatic scanning of documents after the fax number
is entered.
When you set ON, scanning begins automatically 5 seconds after you
enter the fax number.
Settings
OUTPUT NO/
PRINT ERROR ONLY/
OUTPUT YES
ON/OFF
OUTPUT NO/
PRINT ERROR ONLY/
OUTPUT YES
-
ON/OFF
Settings
ON/OFF
4 seconds (1 to 15)
ON/OFF
2 times (1 to 10)
2 minutes (1 to 99)
ON/OFF