Warranty - ABB Emax 2 Installation And Maintenance Manual

Caution This pertains to a hazard that has a low level of risk, which means that if not avoided, it could
result in minor or moderate injury. It also indicates that failure to comply with instructions
may result in product damage (Table 3)
Table 3
Notice or Note This indicates important information in that it aids in job performance, that is, a notice or
note is used to notify practices not related to personal injury (Table 4).
Table 4

2 - Warranty

Warranty This document is based on information available at the time of its publication. While efforts
requirements have been made to ensure accuracy, the information contained herein does not cover all
details or variations in hardware and software, nor does it provide for every possible
contingency in connection with installation, operation, and maintenance.
Features may be described herein that are not present in all hardware and software systems.
ABB Inc USA assumes no obligation of notice to holders of this document with respect to
changes subsequently made. ABB Inc USA makes no representation or warranty, expressed,
implied, or statutory, with respect to, and assumes no responsibility for the accuracy,
completeness, sufficiency, or usefulness of the information contained herein. No warrantees
of merchantability or fitness for purpose shall apply.
Contact Email: eppc.support@us.abb.com, Phone: 888-385-1221, if further information is
required concerning any aspect of Emax 2 Retrofill Circuit breaker operation or maintenance.
4| © 2020 Emax 2 Retrofill Circuit Breakers 600A-4000A
Custom Caution Alerts
Custom Notice Alerts
2TSA451011P0000 Rev-B