Table of Contents
Advertisement
10.3
INSTALLATION OF THE DD13 WASTEGATE SOLENOID
10.3 INSTALLATION OF THE DD13 WASTEGATE SOLENOID
Install as follows:
1. If removed, install the stud to the cylinder block boss. Torque the stud to 10 N·m (7.4 lb·ft).
2. Install the wastegate solenoid on the cylinder block.
3. Install the bolt (3) and the nut (2). Torque each to 30 N·m (22 lb·ft).
4. Install the vehicle air supply (1) to the wastegate solenoid. Torque to 25 N·m (18 lb·ft).
10-6
DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION
All information subject to change without notice.
Advertisement
Table of Contents
Need help?
Do you have a question about the EPA07 and is the answer not in the manual?
Questions and answers