Bosch CL400 Manual page 58

7- -6 General Information Regarding BUEP-E and BUEP19E
Command Codes AST / PST
Command Attribute AST
Address AST High Part
Address AST Low Part
Command Attribute PST
Parameter
Word
PW5 Command code AST
Example
Data module
The command code (Hex-code of the command) of the AST is specified in
the high byte of this parameter, and the command code of the PST is speci-
fied in its low byte.
Parameter
Word
PW6 Command attribute AST
Example 17
H
Data module 23
Parameter
Word
PW7 Address AST high part
Example 10
H
ZS 2
In the PW7 parameter word, the block address of the module, to which the
AST command is referred, is specified.
Parameter
Word
PW8 Address AST low part
Example 32
H
50 bytes
In the low part of the AST address, the byte address (offset) of the used com-
mand is specified.
Parameter
Word
PW9 Command attribute PST
Example A
H
Data module 10
Contents
High Byte
44
H
Contents
Contents
Contents
Contents
1070 072 196-101 (00.06) GB
Low Byte
Command code PST
44
H
Data module