Bosch CL400 Manual page 56

7- -4 General Information Regarding BUEP-E and BUEP19E
PW2
PW3
Parameter Attribute
Word
PW2 W
This word contains the information on which COM-E and via which channel
this job is supposed to be processed.
High Byte
RSS number
Parameter Attribute
Word
PW3 W
At the computer interfaces of the CL400 / CL500, it is possible to start up to
16 jobs in parallel. By indicating the job number, the jobs can be distin-
guished. Another job with the same job number can only be started when the
old one is finished. Such an attempt during a running job will be rejected by
the R5REQ with an error message.
Starting more than one centralized job with different job numbers in a PLC
cycle though is possible.
15 12 11
X X X X X X X X
0 -- Start job
1 -- Delete job from queue
The job numbers 12 to 15 are reserved for high-priority jobs. Such an indica-
tion on the parameter has the effect that this parameter is given high priority
and that it is processed accordingly.
Description
RSS and channel number
Low Byte
Channel number
Description
Job number
8 7 4
X X X X
1070 072 196-101 (00.06) GB
3 0
X X X X
Job number
0 to 16#FFFFH