Table of Contents
Advertisement
Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
Installing the filter silen-
cer
Removing the air suction
branch
Installing the air suction
branch
© Copyright 2020 . All rights reserved.
Pass lifting gear through lugs on back.
u
Unscrew nuts (72027) and remove them together with washers
u
(72018).
Remove filter silencer and set it down to one side.
u
Install filter silencer in reverse order.
u
Disconnect all air lines in accordance with the engine builder's instruc-
u
tions.
Dismantle the insulation where necessary.
u
Pass a lifting gear around the air suction branch. It is permissible to
u
pass the lifting gear through holes possibly provided in the ribs to im-
prove stability.
Unscrew the nuts (72027) and remove them together with the wash-
u
ers (72018).
Remove the air suction branch and set it down to one side.
u
Fit the air suction branch in reverse order.
u
HZTL2464_EN
Rev.E
March 2020
Advertisement
Table of Contents
