GE HygroTrace User Manual page 38

Calibration Data
Bulk Limit
Calibration Curve
To edit the calibration curve, select Cal Curve... on the Cal Data
menu and press Enter. The following screen appears:
Proceed in the same way to Edit PPB Value and/or ZH Value to
change the PPB and/or ZH value for a particular calibration point.
Then select the next calibration point and repeat the process.
When Edit Cal Curve is complete, press Cancel to return to the
Cal Data menu.
HygroTrace Moisture Transmitter
To change the calibration data, select
Cal Data... on the Service Menu,
press Enter and the following screen
appears:
+
To set the bulk limit, select it on the
screen and press Enter. The
following screen appears:
+
Use the arrow keys to change to the
desired value and press Enter (or
Cancel to keep the previous value).
The screen returns to the Cal Data
menu.
+
To set a calibration point, highlight
Select Cal Point, press Enter and the
following screen appears.
+
Use the arrow keys to enter the
desired calibration point to change
and press Enter (or Cancel to keep
the previous value). The screen
returns to Edit Cal Curve.
+
September 2007
33