Communications - GE HygroTrace User Manual

September 2007
Sensor Dry Down (cont.)
Note: If you pressed Enter, the Sensor Dry Down has ended.

Communications

Baud Rate
20
To stop the Sensor Dry Down, select
it again on the User Settings Menu,
press Enter, and this screen appears.
Press Enter to stop the Sensor Dry
Down (or press Cancel to continue)
U
and return to the previous screen.
To change the baud rate, select
Comms... on the Main Menu, press
Enter and the following screen
appears:
Select Baud Rate... and press Enter.
A screen similar to the following
appears.
Use the arrow keys to select a new
baud rate and press Enter. The
number at the top right side of the
screen changes. Press Cancel to
return to the Comms Menu.
HygroTrace Moisture Transmitter