Fujitsu 565Tx User Manual page 82

S e c t i o n T h r e e
Menu Field Options
Mode Output Only; Bi-Directional;
(Not displayed ECP; EPP
when Parallel Port
set to Disabled.)
Base I/O address 378/IRQ 7; 378/IRQ 5;
(Only displayed when 278/IRQ 7; 278/IRQ 5
Parallel Port Mode
selected as Enabled.)
Floppy disk Enabled; Disabled
controller
CardBus Controller Enabled; Disabled
70
Default Description
Output Only Sets the communication mode of the parallel p ort: Bi-directional
(Full Duplex);two-way transfer of information between your
notebook and a connected parallel device. Example:if your
notebook is connected to a parallel printer, it can transfer data
and control information to the printer, and the printer can
transfer back status and error information to your notebook;
Output Only (Half Duplex); information transferred in only one
direction, from your notebook to the printer or similar device;
ECP Mode allows communication with the ECP class of parallel
I/O devices;EPP Mode allows communication with the EPP class
of parallel I/O devices.
378/IRQ 7 Sets the I/O addresses and interrupt level for the parallel port.
Enabled Activates or deactivates the floppy disk controller for
the Multi-function Bay and the MediaConnect.
Enabled Activates or deactivates the PC CardBus controller for
the PC Card slots in the left side of your notebook.