Main Lithium Ion Battery - Fujitsu 565Tx User Manual

3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 4-3.)
4. When the PC Card is fully inserted, the Eject
button will pop out.
5.Flip this button toward the front of your
notebook to fold it out of the way.
6. When the card is installed,lock it in place
by sliding the Lock button toward the front
of your notebook. (Figure 4-3.)
C A U T I O N
Windows ® 95 has a shutdown procedure
for PC Cards that must be followed
before beginning to remove a card.
C A U T I O N
If the PC Card has an external connector
and cable, do not pull on this cable when
removing the card.
U s e r I n s t a l l a b l e
Removing PC Cards
If you wish to remove or replace the PC Card,
use the following procedure:
1.Shutdown operation of the card.
2. Click on the PC Card indicator on the
Windows taskbar.
From the PC Card Properties dialog box:
3. Select the card to be removed and click
on the S t o p button.
4. Verify that the
You can safely remove your card
message appears.
5. If the
device cannot be removed
message appears,save all files, close all
applications, and exit Windows 95. Then
shutoff the power with the power switch
before continuing the card removal.
(See Power Off on page 24.)
6. Flip the Eject button for the card you wish
to remove into position perpendicular to the
body of your notebook.
L i f e B o o k
F e a t u r e s
7. Press the Eject button firmly.
8. When the card pops part way out of the slot
grasp it by the card edge and pull it free. (The
Eject button will recede until it is flush with
the body of your notebook.)
Finger
Ridge

MAIN LITHIUM ION BATTERY

There is a compartment in the bottom of your
notebook which contains the main Lithium ion
battery. Additional main Lithium ion batteries
are available as an option.A bridge battery
allows a charged main Lithium ion battery to be
™ 5 0 0 S e r i e s f r o m F u j i t s u ™
Release
Figure 4-4 Removing the Main Batter y
99