Table of Contents
Advertisement
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the REGISTRATION
sub-menu.
. Press the
mute/menu OK
- - - shows in the display The default setting is 2NO.
. Use the touch-tone pad to select 1 for YES or for NO. Or use the caller ID-volume
( 6 or 5) button to scroll to 1YES or 2NO.
. If you select 1YES, press the
SECONDS, THEN PRESS HANDSET PROGRAM shows in the display. (Your handset
should be held near the base during registration process.)
5. Press and hold the page button on the base unit, the
indicator flashes. Press the handset
in the display. HANDSET X REGISTERED shows in the handset display, where X is
the handset number. You may now rename your handset. (Refer to Step & of
Handset Name Section)
NOTE: IF you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.
button to enter the menu. REGISTRATION 1YES42NO
mute/menu OK
mute/menu OK
button. HOLD BASE PAGE FOR 5
charge/in use voicemail
button. REGISTERING shows
1
Advertisement
Table of Contents
