GE 28821 Series User Manual page 30

Area Code
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the AREA CODE sub-menu.
. Press mute/menu OK
the display.
. Use the touch-tone pad to enter your -digit area code.
. Press the mute/menu OK
the new area code shows in the display.
NOTE: To restore the default setting to - - -, press and release
intercom/conf
Tone/Pulse
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-
menu.
. Press mute/menu OK
shows in the display. The default setting is "1 TONE".
. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.
. Press the mute/menu OK
your selection shows in the display.
0
button to enter the menu. SET AREA CODE - - - shows in
button to confirm. You will hear a confirmation tone and
when SET AREA CODE shows in the display.
button to enter the menu. TONE/PULSE 41TONE 2PULSE
button to confirm. You will hear a confirmation tone and
delete/