Advertisement
■Compensate log time
This tool can compensate log time with PC's time, because
information display is not set date and time.
(CAUTION)
・
It cannot display correct time in case that PC's time is not correct
when it get logs or in case that user changed information
display's date or time within the range of logs.
Select "View" - "Compensate Log Time by PC Time" in menu bar.
Then, the item in menu is checked and "Date" is compensated
by PC's time. (It's not checked and not compensated as default.)
■Clear logs
Select "File" - "Clear Logs" in menu bar. Then, confirming dialog
as below appears.
Logs stored in information display will be removed if you push
[OK] button.
It erases logs in information display and list, so logs should be
stored to file if you need to find out a problem.
For the logs of "Power OFF cause," "Signal change," and
"Operation," when the number of items exceeds the maximum
number, the oldest
one is deleted and the newest one is saved. When, however, even
one log of "Abnormal state" is saved, the logs of "Power OFF
cause," "Signal change," and "Operation" are not revised in order
to maintain the analysis information at occurrence of the
abnormality. In such a case, clear the logs with this function.
PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 29
Advertisement
