5. External Dimensions / Marking Layout
5.1. External Dimensions
RX4111CE
External Dimensions
3.2 0.2 (Typ.3.24)
0.42
Figure 8 External dimensions
5.2. Marking Layout
RX4111CE
Logo
#1 Pin Mark
Contents displayed indicate the general markings and display, but are not the standards for the fonts, sizes and
positioning.
Figure 9 Marking layout
RX4111CE
ETM62E-02
"CE"PKGRev.05
0.7
0.3
*1. The metal pads on the short side of the 1st and 10th pins of the
package are inspection pads for the crystal unit.
For stable oscillation, make sure that leakage current due to
condensation or dust does not occur between these pads.
The metal pads on the short side of the 5-pin and 6-pin sides are not
0.4
0.35
connected inside the RTC.
R4111X
Seiko Epson Corporation
5. External Dimensions / Marking Layout
Recommended soldering pattern
*1
Type
Frequency Tolerance
A : A
B : None
123A
0.7
0.4
0.3
Unit : mm
Production lot
Jump to
Top
/
Bottom
8