Configure a XS-2426G-A indoor ONT
Network configuration
Configuring QoS
Table 8-22 US Classifier Rules parameters
Field
Policy
Classifier
Interface
Source MAC
Destination MAC
Source IP
Destination IP
Source Port
Destination Port
IP Protocol Type
11
Click Save.
You can click Reset to reset the configured values.
12
To delete a classifier rule, click Delete for the applicable classifier rule in the classifier rules
table.
You can click Refresh to update the displayed information.
E
ND OF STEPS
8.29
Configuring QoS
1
Click Network QoS Config from the left pane in the 10G PON Home Gateway page. The
QoS Config page displays.
December 2020
Issue 1
Description
Select a policy from the list.
Select a classifier from the list.
Select an interface from the list; for example, None, LAN, 2.4G SSID, 5G SSID.
Enter a source MAC address.
Enter a destination MAC address.
Enter a source IP address.
Enter a destination IP address.
Enter a source port.
Enter a destination port.
Enter a value between 0 and 254.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
121