Table 8-20 Us Classifier Policy Parameters - Nokia ONT Product Manual

Configure a XS-2426G-A indoor ONT
Network configuration
Configuring Upstream (US) Classifier
2
Configure the following parameters:

Table 8-20 US Classifier Policy parameters

Field
Tunnel Type
Tunnel Interface
VLAN ID
VLAN Tag
VLAN Priority
IP TOS/DSCP
Drop
3
Click Save.
You can click Reset to reset the configured values.
4
To delete a policy, click Delete for the applicable policy in the policy table.
A policy can only be deleted if it is not associated with any classifier rules.
You can click Refresh to update the displayed information.
5
Click Network US Classifier from the left pane in the 10G PON Home Gateway page, and
select the Classifier tab.
All classifiers are displayed in the classifier table in the page.
118
Description
The tunnel type is set to GRE and cannot be modified.
Select a tunnel interface from the list: No Tunnel, GRE Tunnel, or LAN traffic.
Enter a VLAN ID (0-4094).
This field is not configurable. The VLAN tag is set to 8100 (hexadecimal).
Determines the VLAN tag used inside the GRE tunnel.
Enter a VLAN priority level (0 to 7). A lower number indicates a higher priority.
This field is not configurable. All tunnel packets are generated with a default DSCP value
(usually 0).
Select this checkbox to drop the packets.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
December 2020
Issue 1