Configuring Upstream (Us) Classifier; Figure 8-25 Us Classifier Policy Page - Nokia ONT Product Manual

Configure a XS-2426G-A indoor ONT
Network configuration

Configuring Upstream (US) Classifier

3
Click Save.
You can click Delete to delete the entries.
E
ND OF STEPS
8.28 Configuring Upstream (US) Classifier
The US Classifier feature is used to create policies, classifiers, and classifier rules for upstream
traffic handling. This feature is available to admin users (super users) only.
A policy defines an action to be performed on a set of LAN or WAN packets. A policy can be created
at any time and then subsequently assigned to one or more classifiers.
A classifier is used to select key fields for which the classifier rules will be written. A classifier can be
created at any time and then subsequently assigned to one or more classifier rules.
A classifier rule is used to assign actions to a group of packets based on a set of parameters. A
classification rule must be created against a pre-defined classifier.
Up to 16 policies can be created, with up to 8 classifiers and 32 classifier rules.
1
Click Network US Classifier from the left pane in the 10G PON Home Gateway page, and
select the Policy tab.
All classifier policies are displayed in the policy table in the page.

Figure 8-25 US Classifier Policy page

December 2020
Issue 1
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
117