Connection; Motor-Pump Unit Hydraulically Connected; Ready-Made Connection Cables For Mpas1 - Bosch Rexroth Sytronix SvP 70 Series Operating Instruction

DOK-SYTROX-MPAS1******-IT01-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPAS1
8

Connection

8.1

Motor-Pump Unit Hydraulically Connected

8.2

Ready-made Connection Cables for MPAS1

LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
● Remove the flange covers on suction and pressure connection.
● Immediately wipe away outgoing hydraulic fluid.
● Check the line for cleanliness.
● Ensure that the line connection contains the specified sealings.
● Lock O-rings with assembly grease against slipping , if necessary.
● Now, hydraulically connect the pump according to the specifications of
the machine manufacturers.
For further information refer to mounting instruction: Rexroth Sytronix Motor-
Pump Unit MPAS1 PGM4 - MSK101 - Air Cooling
Material number: R911342449
W0054
HCS02.1E
W0070
W0070
HCS03.1E W0100
W0150
W0036
W0054
HMS01.1N W0070
W0110
W0150
Tab. 8-1: Ready-made Connection Cables
Encoder Cables
The encoder cable used is RKG0047.
The order designation of ready-made cables consist of cable
number and length (e.g. RKL0047/010.0 for a cable length of 10.0
m).
Bosch Rexroth AG
MPAS1-PGM4NE-___NNNN-V__-
110CBHA 110DBHA 110EBHA
RKL0067
RKL0067 RKL0069
RKL0067 RKL0069 RKL0071
RKL0070 RKL0072
RKL0072
RKL0075
RKL0067 RKL0069
RKL0069 RKL0071
RKL0070 RKL0072
RKL0072
45/83
Connection
110FBHA
RKL0079
RKL0073
RKL0073
RKL0073
RKL0073