Table of Contents
Advertisement
DOK-SYTROX-MPAS1******-IT01-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPAS1
2
Safety Notes
2.1
About this Chapter
2.2
Appropriate Use
2.3
Inappropriate Use
2.4
Qualification of the Personnel
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
This product was manufactured according to the generally accepted rules of
technology. There is, however, still a risk of personal injury or material dam‐
age.
Please observe the general safety instructions in this chapter and the safety-
related guidelines and handling instructions in this manual. This will prevent
personal hazards, material damage and errors.
●
Read this documentation completely and thoroughly before working with
this product.
●
Keep this documentation where it is accessible to all users at all times.
●
Transfer the product to third parties only together with the necessary
documentation.
This product is an electro-hydrostatic drive system.
The SvP system is exclusively designed to be mounted into a machine or be
joined with other components to one machine or an aggregate. It is only al‐
lowed to operate the SvP system, if it is mounted into the machine, for which
it is designed.
The SvP system may be operated as follows:
●
For pressure-controlled hydraulic supply with detaching volume flow
control.
●
The SvP system is not suited to execute safety-relevant functions.
Within the SvP system, a plausibility check of the command and
actual value (pressure and speed) is not provided.
●
Ensure that the plausibility check is done within the machine
control.
An application specific adjustment of the parameters during initial start-up is
not permitted.
The product is only defined for industrial use and not for private use.
Appropriate use involves that you have completey read and understood this
documentation, especially chapter 2 "Safety Notes".
Each other use, wihich is not described as appropriate use is non-appropriate
use and therefore not permitted.
For damage during non-appropriate use, Bosch Rexroth does not assume
any liability. The risks of non-appropriate use is in the sole responsibility of
the user.
The operations described in this documentation make basic knowledge of
mechanic, hydraulic and electric and knowledge about corresponding terms
necessary. For transport and handling of the product, additional knowledge at
Bosch Rexroth AG
19/83
Safety Notes
Advertisement
Table of Contents
