Power Connector Cable - HP Pavilion 14 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the WLAN module (see
7. Remove the memory module (see
8. Remove the hard drive (see
9. Remove the solid-state drive (see
10. Remove the fan assembly (see
11. Remove the display (see
12. Remove the system board (see
To remove the power connector cable:
▲ Disconnect the cable from the removed system board.
Reverse this procedure to install the power connector cable.
Bottom cover on page
Battery on page 29).
WLAN module on page
Memory module on page
Hard drive on page 33).
Solid-state drive (SSD) on page
Fan on page 39).
Display assembly on page
System board on page
27).
30).
32).
35).
43).
53).
Component replacement procedures
Spare part number
938151-001
57