Speakers - HP Pavilion 14 Maintenance And Service Manual

Speakers

Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the WLAN module (see
7. Remove the memory module (see
8. Remove the hard drive (see
9. Remove the solid-state drive (see
10. Remove the fan assembly (see
11. Remove the display (see
12. Remove the system board (see
To remove the speakers:
▲ Remove the cable from its routing path along the edge of the computer (1), and then remove the
speakers from the computer (2).
Reverse this procedure to install the speakers.
IMPORTANT:
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
WLAN module on page
Memory module on page
Hard drive on page
Solid-state drive (SSD) on page
Fan on page
Display assembly on page
System board on page
When installing the speakers, be sure to route the cable under the WLAN module.
27).
29).
30).
32).
33).
35).
39).
43).
53).
Spare part number
930614-001