JVC CA-MXS6MDR Service Manual page 33

5.Independent operation mode
In case the checking mode or adjustment
when occur the error at disc adjustment,
Independent mode into by select the key
before release the TERST MODE.
MD TEST MODE 2
1.Setting the TEST MODE 2
(CAUTION) MD mode should NO
DISC condition, when POWER
ON to not read TOC.
Press [STOP key] and
[CANCEL key] together,
and connect the power cord.
LCD indication
MD TEST MODE 1
Setting the MD TEST MODE1
by press [POWER key]
LCD indication
[HELLO] then
[MD TEST MODE 1]
Setting the MD TEST MODE2
by press [STOP key] and
[TITLE/EDIT key] together
Setting OK
3.Indication the C1 ERROR
TEST MODE 2
Insert the recordable
disc (basically 74min.)
Read the TOC
Press [8 key] of
the Remote controller
LCD indication (change by each 10sec.)
[_ _ _
LCD indication (change be each 10sec.)
[______ Times_]
Remote controller [SLEEP]
Remote controller
Remote controller
Remote controller
Remote controller
Remote controller [STOP]
Main body
_ _]
Operation key
Focus search
[6 key] Pit rough servo
[7 key] Groove rough servo [GR.R.SERVO]
[8 key] Tracking ON
[9 key] Tracking OFF
[EJECT]
2.Indication the drift level of
the pickup adjustment value
TEST MODE 2
Insert the Pre-master disc
Read the TOC
Press [6 key] of the
Remote controller
LCD indication
[ _
IVR IVR (Pre-master, Recordable groove)
TAGC TRK AGC (
TBAL TRK BALANCE (
LPOW Laser power (Play power=0 Rec power)
FBIA Focus bias (
FAGC Focus AGC (
TEOF TE offset (
SAGC Sled AGC (
4.Release the MD TEST MODE
TEST MODE
Press [POWER key]
POWER OFF
Release the TEST MODE
CA-MXS6MDR
SP-MXS6MD
MODE
[FOCUS_SEARCH]
[P.R.SERVO]
[TRACKING_ON]
[TRACKING_OFF]
STOP [STOP]
EJECT [EJECT]
]
Adjustment value
)
) = 0
) = 0
)
) = 0
)
1-33