Selecting Voices From The User Buttons - Yamaha Electone STAGEA ELC-02 Owner's Manual

Selecting Voices from the User Buttons

Selecting Voices from the
User Buttons
This Electone has a wide variety of Voices from which
you can choose — far greater than what is immediately
apparent from the Voice buttons on the panel. Each Voice
section has one or two User buttons (numbered 1 or 2)
which can be found at the right side of each Voice
section. You can use the User buttons to select Voices that
cannot be selected normally from the Voice buttons —
such as Contrabass for the Upper Keyboard Voice.
1
Press one of the User buttons in any of
the Voice sections.
2
Select the desired instrument category
with the category buttons in the display.
You can also choose the "USER" category to select a
User Voice you have created.
Reference page
• Voice Edit (page 136)
If you select "Voice Link" as Category, you can select
a Voice with the settings made on the Voice
Condition display (page 41).
Reference pages
• Using Voice Link (page 48)
• Selecting a Voice registered to Voice Link (page 48)
28 ELC-02/ELCU-M02 Owner's Manual
User buttons
Instrument categories
For example, to call up Marimba 1, select the
Percussion category.
Reference page
• Voice List (page 29)
The name of the selected category (Percussion) is
displayed on the upper left.
The Voice name shown under the category name is
that of the currently assigned Voice and is irrelevant
to the Voice menu below.
To directly select the desired category, hold down one
of the User buttons and simultaneously press the
desired Voice button.
1. While holding down the User button...
2. Press the Voice button.
3
Select a Voice (Marimba 1, for example)
from the displayed Voice Menu.
Pressing the number buttons in the display calls up
the other Voices in the category.
The Voice name of the selected Voice (Marimba 1)
appears above the category name, indicating that the
Voice has been selected.
Percussion