LCD Display Settings
LCD Display Settings
Here you can change the display settings: displayed
language (English or Japanese), touch panel sound, and
display brightness.
Selecting the display language
The LCD display can be shown in two languages, English
and Japanese. The default setting is English.
1
Press the [UTILITY] button to call up the
GLOBAL Page of the Utility display.
NOTE
The settings in the Utility display are automatically saved
when another display is called up.
2
Press the desired button,
(Japanese) or [English].
LANGUAGE
16
ELC-02/ELCU-M02 Owner's Manual
Muting the touch panel sound
By default, the Electone is set with the touch panel sound
turned on, giving you audio feedback when you press a
button or control. If you want to mute the touch panel
sound, follow the procedure below.
1
Press the [UTILITY] button to call up
GLOBAL Page of the Utility display.
2
Press the [OFF] button of the TOUCH
PANEL SOUND to mute the sound.
TOUCH PANEL SOUND
To turn the sound on again, select [ON] in step 2.
Adjusting the display brightness
You can adjust the display brightness to a comfortable,
easy-to-read level.
1
Press the [UTILITY] button to call up the
GLOBAL Page of the Utility display.
2
Move the LCD BRIGHTNESS slider by
touching it directly or using the Data
Control dial.
Higher settings make the display brighter and lower
settings make it darker.
LCD BRIGHTNESS