Cleaning; Removing Dirt And Debris From The Machine - Toro 25430 Operator's Manual

Replacing a Damaged ROPS System
If the ROPS system has been damaged in an accident, such
as a rollover or hitting an overhead object during transport,
replace any damaged ROPS components to restore the ROPS
system to its original level of protection.
After an accident, check the following items for damage:
•
The ROPS bar
•
Operator seat
•
Seat belt mounting
•
Seat belt
Before you operate the machine, replace all damaged ROPS
components; contact an Authorized Toro Service Dealer.
Important: Do not try to weld or straighten a damaged
ROPS bar.

Cleaning

Removing Dirt and Debris from
the Machine
Important: Operating the engine with blocked screens,
dirty or plugged cooling fins, and/or cooling shrouds
removed, will result in engine damage from overheating.
1. Lower all attachments and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Wipe away dirt and debris from the air cleaner.
4. Clean any dirt and debris buildup on the engine with a
brush or blower.
Important: It is preferable to blow dirt out, rather
than washing it out. If water is used, keep it away
from electrical items and hydraulic valves. Do
not use a high-pressure washer. High-pressure
washing can damage the electrical system and
hydraulic valves or deplete grease.
66