Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro 31230 Operator's Manual

1. Fuel gauge

Specifications

Note: Specifications and design are subject to change
without notice.
Length
Width (Rear Wheels)
Height
With Roll Bar up
With Roll Bar down
Weight
Model 31230 with 60-inch
base deck (Model 30457)
Model 31230 with 60-inch
side-discharge deck (Model
30456)
Model 31230 with 72-inch
base deck (Model 30353)
Model 31230 with 72-inch
side-discharge deck (Model
30354 or 30481)

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Figure 6
2. Fuel-tank cap
241.3 cm (95 inches)
144.8 cm (78 inches)
144.8 cm (78 inches)
54 inches (137.2 cm)
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to operate or
service the machine. Local regulations may restrict the
age of the operator. The owner is responsible for training
all operators and mechanics.
•
Become familiar with the safe operation of the equipment,
operator controls, and safety signs. Know how to stop
the machine and engine quickly.
•
Check that all safety devices are attached and
functioning properly. This includes, but is not limited to,
operator-presence controls; safety switches and shields;
the rollover protection system (ROPS); attachments; and
brakes. Do not operate the machine unless all safety
devices are in position and functioning as intended by
the manufacturer.
•
Always inspect the machine to ensure that the blades,
blade bolts, and cutting assembly are not worn or
damaged. Replace worn or damaged blades and bolts in
2,776 lb
sets to preserve balance.
•
Inspect the area where you will use the machine and
2,806 lb
remove all objects that the machine could potentially
throw.
2,814 lb
•
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories required to
operate the machine properly and safely.
2,862 lb
12