Safety; General Safety; Vibration Level; Safety And Instructional Decals - Toro 31230 Operator's Manual

Safety

This machine has been designed in accordance with EN ISO
5395:2013 and ANSI B71.4-2012.

General Safety

This product is capable of amputating hands and feet and
of throwing objects. Always follow all safety instructions to
avoid serious personal injury.
Using this product for purposes other than its intended use
could prove dangerous to you and bystanders.
•
Read and understand the contents of this Operator's Manual
before you start the engine. Ensure that everyone using
this product knows how to use it and understands the
warnings.
•
Do not put your hands or feet near moving components
of the machine.
•
Do not operate the machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance from the machine.
•
Keep children out of the operating area. Never allow
children to operate the machine.
•
Stop the machine and shut off the engine before servicing,
fueling, or unclogging the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Stored energy hazard—read the Operator's Manual.
1. Rotating belt — Keep guard in place
93-6696
117-4979
Improperly using or maintaining this machine can result
in injury. To reduce the potential for injury, comply with
these safety instructions and always pay attention to the
safety-alert symbol, which means Caution, Warning, or
Danger—personal safety instruction. Failure to comply with
these instructions may result in personal injury or death.
You can find additional items of safety information in their
respective sections throughout this manual.

Vibration Level

CE Model Only
Hand-Arm
Measured vibration level for right hand = 0.39 m/s
Measured vibration level for left hand =0.34 m/s
Uncertainty Value (K) =0.5 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.54 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
1. Engine coolant under
pressure
2. Explosion hazard—read
the Operator's Manual.
4
2
2
2
2
2
117-3276
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.