Fuses - Toro 30447 Operator's Manual

WARNING
Incorrect battery cable routing could damage
the machine and cables causing sparks. Sparks
can cause the battery gasses to explode,
resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative (black)
cable.
4. Coat both battery connections with Grafo 112X
(skin-over) grease, Toro Part No. 505-47, petroleum
jelly, or light grease to prevent corrosion. Slide the
rubber boot over the positive terminal.
5. Install the battery cover.

Fuses

There traction unit fuses (Figure 59 thru Figure 61) are
located under the hood in the fuse box.
Figure 59
1. Fuse box
1. Fuses
1
g011539
1. Read the Operator's
2. Engine preheat—60A fuse 8. Instuments—10A fuse
3. Engine, start—20A fuse
4. Headlights—10A fuse
5. Turn signal—10A fuse
6. Power Seat—10A fuse
42
Figure 60
Figure 61
Manual for fuse
information.
1
G011542
7. Powerpoint—10A fuse
9. Control module—2A fuse
10. Control module—2A fuse
11. Powerpoint—7.5A fuse