Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 10 hours
Before each use or daily
Yearly
Checking the Tire Air
Pressure
Service Interval: Before each use or daily
Tire air pressure specification: 34 kPa (5 psi)
Check the air pressure in the tires
remove air as needed to set the air pressure in the
tires to the tire air-pressure specification.
Figure 32
Checking the Wheel
Bearings for Freeplay
Service Interval: Yearly
1.
Remove any machines that may be stored on
the trailer.
2.
Use a jack to raise the trailer and place jack
stands under the trailer.
3.
Check each wheel for excessive freeplay (i.e.,
free movement of the tire and hub assembly).
If you detect excessive freeplay, contact to your
authorized Toro distributor.
Maintenance Procedure
• Check the torque of the wheel lug nuts.
• Check the tire air pressure.
• Check the wheel bearings for endplay.
• Lubricate the chain.
• Check the torque of the roller-mount fasteners.
• Check the stop gap (rail-loading kit only).
(Figure
32). Add or
g001055
Lubricating the Chains
Service Interval: Yearly
Apply general-purpose grease to each chain.
Checking the Torque of the
Roller-Mount Fasteners
Service Interval: Yearly
Torque the roller-mount fasteners
N∙m (700 in-lb).
1. Roller-mount fasteners
15
(Figure
33) to 79
Figure 33
g337082
Advertisement
Table of Contents
