Huawei AP2030DN Hardware Installation And Maintenance Manual page 70

AP2030DN
Hardware Installation and Maintenance Guide
Figure 5-69 Aligning the male connector with the female connector
Step 3 Hold the shell labeled "PUSH" and feed the male connector into the female connector until
you hear a clicking sound. The male and female connectors are securely installed, as shown in
Figure
Figure 5-70 Installed MPO fiber connector
Step 4 To disassemble an MPO fiber connector, hold the shell labeled "PULL" and remove the male
connector, as shown in
Issue 05 (2016-07-22)
5-70.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-71.
5 Appendix
64