Huawei AP2030DN Hardware Installation And Maintenance Manual page 46

AP2030DN
Hardware Installation and Maintenance Guide
Matching Pins of Wires
8
Step 7 Cut off the surplus cables along the lower edge of the wire holder, as shown in
Figure 5-24 Cutting off surplus cables
Step 8 Put the connector body onto the wire holder and turn the metal shell by 90°, as shown in
Figure
Figure 5-25 Putting the connector body onto the wire holder
Step 9 Push the metal shell toward the connector body until the wire holder and the connector body
are engaged completely. Crimp the connector, as shown in
Issue 05 (2016-07-22)
5-25.
NOTE
Ensure that the wire holder is in good contact with the connector body.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Color
Brown
Figure 5-26.
5 Appendix
Figure 5-24.
40