Table of Contents
Advertisement
10/96
SYDFED-2X, SYDFED-3X, SYHDFED-1X | Safety instructions
Bosch Rexroth AG, Edition 11.2021, RE 30017-B
2 Safety instructions
2.1
ABOUT THIS CHAPTER
The SY(H)DFED control system has been manufactured according to good
engineering practice. However, there is still a risk of personal injury and damage
to property if you do not observe this chapter and the safety instructions in this
documentation.
▶ Read these instructions completely and thoroughly before working with the
SY(H)DFED control system.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the product on to
third parties.
2.2
INTENDED USE
The product is electrical/hydraulic equipment.
You may use the product as follows:
• for the electrohydraulic pressure and swivel angle control of an axial piston
variable displacement pump
The pressure/flow control system is intended exclusively for being integrated in
a machine or installation or for being assembled with other components to form
a machine or system. The product may be commissioned only if it is integrated in
the machine/system for which it is designed.
Observe the technical data, operating conditions and performance limits according
to the data sheet and the order confirmation.
The product is intended exclusively for professional use and not for private usage.
Operation according to the intended use also implies that you have read
and understood this documentation completely, especially chapter 2 "Safety
instructions".
2.3
IMPROPER USE
Any use other than described in the section "Intended use" is considered as
improper and is therefore not permitted.
The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating states in the application which in turn
could cause personal injuries and/or damage to property. Therefore, please only
use a product for safety-relevant applications if this use is expressly specified
and permitted in the documentation of the product. For example, in explosion-
protection areas or in safety-related parts of a control (functional safety).
Bosch Rexroth AG does not assume any liability for damage caused by improper
use. The user assumes all risks involved with improper use.
Improper use of the product includes:
• If you do not adhere to the technical data, operating conditions and performance
limits specified in the data sheet and given in the order confirmation.
• If you do not observe national EMC regulations during operation for the
application at hand. The manufacturer of the system or machine is responsible
for complying with the limit values stipulated in national regulations (European
countries: EU Directive 2014/30/EU (EMC Directive); USA: See National
Advertisement
Table of Contents
