Installation Work - Mitsubishi Electric AHU-KIT-SP Manual

14. Installation work

●Installation procedure
Install AHU interface in the direction shown in the figure below so that letters can be read correctly.
1. Slide the fixed part down (2 places).
2. Hang the box on the DIN rail.
3. Push the fixed part (2 places) up and fix onto the DIN rail.
●Installation clearances
Make sure it is securely fastened.
MODEL NAME
Air Handling Unit Interface
MODEL TYPE
AHU-KIT-SP
ISSUE CLASSIFICATION
INSTALLATION
MORIKAWA
DWG NO.
REV.MARK PAGE
PSZ000Z308
21.09.17
35/38