Table of Contents
Advertisement
1-10. Installation of Optional Boards
DME-3000/7000 can be used for various systems, and its
functions can be extended by selecting the optional boards.
DME-3000/7000 has the following optional boards.
VIF-9A board (BKDM-3020):
Digital Composite Input/Output Board
VIF-6A board (BKDM-3021):
Digital Component Input/Output Board
VIF-9 board (BKDM-3022):
Digital/Analog Composite Input/Output Board
VIF-6 board (BKDM-3023):
Digital/Analog Component Input/Output Board
MPU-72 board (BKDM-3030):
Non-linear Effects Board
WKG-13 board (BKDM-3040):
Wipe & Graphics Board
CMB-1 board (BKDM-3050):
Combiner & Lighting Board
KPC-2 board (BKDM-3060):
Key Channel & Recursive Effects Board
MPU-80 board (BKDM-7031):
Digital Sparkle Effects Board
WKG-16 board (BKDM-7041):
Digital Sketch Effects Board
KPC-9 board (BKDM-7060)
Key Channel & Recursive Effects Board
SKP-1 board (BKDM-7070)
Advanced Shadow Effects Board
(*1) : DME-7000 only
This section explains how to install the following optional
boards.
• MPU-72 board (BKDM-3030)
• MPU-80 board (BKDM-7031)
• WKG-16 board (BKDM-7041)
For how to install the board other than those mentioned
above, refer to the section 1-9.
(*1)
:
(*1)
:
1-10-1. MPU-72 Board (BKDM-3030)
Installation
Connect the MPU-72 board to the MPU-70 board accord-
ing to the following procedures.
1. Remove the seven screws securing the dummy plate
and the shield plate.
PTTWH3
X
PTTWH3
6
X
PTTWH3
6
Dummy plate
2. Connect the connectors on the MPU-72 board to the
connectors on the MPU-70 board.
3. Install the MPU-72 board in the MPU-70 board and
shield plate with the eleven screws removed in step 1.
PTTWH3
X
PTTWH3
6
X
PTTWH3
6
MPU-72 board
1-10. Installation of Optional Boards
X
6
MPU-70 board
Shield plate
X
6
MPU-70 board
Shield plate
1-29 (E)
Advertisement
Table of Contents
