Table of Contents
Advertisement
1-1. Operating Environment (Common)
Operating guaranteed temperature :
Performance guaranteed temperature : +10 dC to +35 dC
Operating humidity :
Storage temperature :
Mass
MKS-9011A :
Approx. 10.0 kg
MKS-9012A :
Approx. 11.5 kg
MKS-8011A :
Approx. 2.3 kg
MKS-8031ATB : Approx. 0.7 kg
MKS-8032A :
Approx. 0.7 kg
MKS-8033A :
Approx. 0.7 kg
MKS-8035A :
Approx. 0.6 kg
MKS-8041 :
Approx. 0.4 kg
MKS-8075A :
Approx. 0.6 kg
Prohibited locations for installation
. Areas where the unit will be exposed to direct sunlight or
any other strong lights.
. Dusty areas
. Areas subject to vibration.
. Areas with strong electric or magnetic fields.
. Areas near heat sources.
. Areas where is subject to electrical noise.
. Areas subject to static electricity.
Ventilation
The inside of the MKS-9011A/9012A is cooled by a fan.
The power supply can be damaged if the exhaust vent (on
the rear) and air intake (on the front) are blocked or the fan
is stopped.
Therefore, leave a blank space of more than 10 cm in the
front and back of the MKS-9011A/9012A.
1-2. Power Supply
Power specifications
A switching regulator is used for the power supply of
MKS-9011A/9012A. A voltage within the range of 100 V
to 240 V can be used without changing the supply voltage.
Power requirements: AC 100 to 240 V ± 10 %
Power frequency:
50/60 Hz
Current consumption
MKS-9011A:
1.0 - 0.6 A
MKS-9012A:
1.0 - 0.6 A
CCP-9000A
Section 1
Installation
n
As the inrush current at turn-on is a maximum 21.5 A (at
+5 dC to +40 dC
100 V) /52 A (at 240 V), the capacity of the AC power
source must be commensurate with this load.
10 % to 90 %
If the capacity of the AC power is not adequately large, the
_20 dC to +60 dC
AC power source breaker will operate or the unit will
abnormally operate.
Recommended power cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
. Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
. Never use an injured power cord.
. Plugging the power cord in the AC inlet, push as far as it
will go.
For customers in the U.S.A. and Canada
For customers in the all European countries
1 Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11
1
1 Power cord, 250 V 10 A (2.4 m) : ! 1-782-929-22
1
AC inlet
AC inlet
1-1
Hide quick links:
Advertisement
Table of Contents
