Table of Contents
Advertisement
[G PED]
Sets the Gch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[B PED]
Sets the Bch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[PEDESTAL OFFSET]
Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON]
[OFF]
[GAMMA MODE SEL]
Selects the gamma mode.
[HD]
[SD]
[FILMLIKE1]
[FILMLIKE2]
[FILMLIKE3]
[FILM‑REC]
[VIDEO‑REC]
[HLG]
@
NOTE
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[GAMMA SETTING]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[MASTER GAMMA]
Sets the master gamma in 0.01 steps.
The items that can be set are as follows.
f [0.30]...[0.75]
[F-REC DYNAMIC LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], dynamic range is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [200%] ... [600%] (100% step)
[F-REC BLACK STR LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], black stretch is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [0%]...[30%]
[V-REC KNEE SLOPE]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee slope is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [150%] ... [500%] (50% step)
[V-REC KNEE POINT]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee point is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [30%]...[107%]
[BLACK GAMMA]
Sets the gamma curves of dark areas.
[−8]...[−1]
[0]
[1]...[8]
Chapter 4 Operation — Menu settings
Keeps each of the values set in [R PED], [G PED], and [B PED].
Sets the pedestal level of Rch, Gch, and Bch to [0].
Sets the gamma characteristics for HD (High Definition).
Increases gain in darker areas more than HD gamma.
Sets the characteristics that reproduce more highlight areas compared to HD gamma.
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE1].
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE2].
Sets the cine gamma characteristics for film.
Sets the cine gamma characteristics for video.
Sets the hybrid log gamma (HLG) characteristics.
Compresses the dark area.
Standard state
Expands dark areas.
– 80 –
Advertisement
Table of Contents
