Panasonic AJ-UPX360ED Operating Instructions Manual page 70

[OFF]
(Factory setting: [OFF])
[MACRO]
Enables/disables the focus macro function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
[ON]
[OFF]
(Factory setting: [OFF])
[AF AREA WIDTH]
Adjusts the width of the area enable for the auto focus to match the size of the subject.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[A.IRIS SPEED]
Sets the control speed of the auto iris level function.
The items that can be set are as follows.
f [FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[A.IRIS WINDOW]
Selects the auto iris detection window.
[NORMAL1]
[NORMAL2]
[CENTER]
(Factory setting: [NORMAL1])
[AREA MODE]
Assign the function that is performed within the area selected by touching the LCD monitor or pressing the <%> button, <(> button, <)> button,
or <=/&> button while shooting.
[INHIBIT]
[FOCUS]
[IRIS]
[Y GET]
[FOCUS/IRIS]
[FOCUS/Y GET]
(Factory setting: [INHIBIT])
[IR REC]
Enables/disables the IR recording.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
@
NOTE
t The setting is fixed to [OFF] when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[AUTO SW]
[A.IRIS]
Enables/disables the auto iris control.
[ON]
[OFF]
(Factory setting: [ON])
[AGC]
Sets the auto gain control operations when [ON] is selected in [A.IRIS].
[ON]
[OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu settings
Does not adjust the focus automatically.
Enables the focus macro function.
Disables the focus macro function.
Window that is around center of the screen.
Window that is around bottom of the screen.
Window that is a spot around center of the screen.
Disables assignment of functions.
Assigns the auto focus function.
Assigns the auto iris function.
Assigns the brightness display function.
Assigns the simultaneous operation of the [FOCUS] and [IRIS].
Assigns the simultaneous operation of the [FOCUS] and [Y GET].
Performs the auto iris control operation when in auto mode. The <IRIS> button does not work.
Does not perform the auto iris control operation when in auto mode.
This activates the iris control selected with the <IRIS> button.
Performs the operation of the [AGC] function that automatically adjusts camera gain when in auto mode.
Does not perform the operation of the [AGC] function that automatically adjusts camera gain when in auto mode.
– 70 –