Media Usage/Compatibility; Media Characteristics By Media Library Parameters - Canon varioPRINT 135 Customer Expectation Document

16. Media Usage/Compatibility

The Canon varioPRINT 135 maintains reliable, predictable, and high-quality output.
Consistency of the output is dependent on knowing and compensating for the
variables of a print job. The Canon varioPRINT 135 incorporates many control
systems which compensate for environmental and print process conditions.
Another variable is the print media. Knowing the characteristics of the media
facilitates optimal print output.

16.1 Media Characteristics by Media Library Parameters

This section describes the standard media library characteristics and parameters.
The following settings can be manually adjusted through the Settings Editor >
Media > Add icon. The Settings Editor can only be accessed via a Web browser
using the IP address of the Canon varioPRINT 135.
The IP address of the Canon varioPRINT 135 is found on the machine's operator
panel through System > Local key operator settings > Connectivity > TCP/IP
address.
The table below describes the Add new media settings and each setting's
description.
Setting
Name
Type
Size
Width (0.01 inches)
Length (0.01 inches)
Tab sheet
Insert
Oriented
Cycle length
Punch count
Weight (lb Bond/lb Index)
Color
RGB Color
Surface type
Version 13
Set the name of the media.
Set the brand name of the paper.
Select the size of the paper from the drop-down list, including
custom size paper.
Specify the width of the custom paper in millimeters or inches.
Specify the length of the custom paper in millimeters or inches.
Select the check box to use tab paper, and then enter the cycle
length (how many tabs in one set).
Select the check box to use the paper as a sheet insertion, and
then enter the cycle length (how many sheet insertions in a set).
Specify the portrait or landscape orientation of the paper.
Set the value 1 to N. Where "N" is the number of sheets in one
cycle. Must specify the cycle length when specifying tab sheets
or sheet insertions.
Specify how many holes are in the pre-punched paper.
Specify the weight of the paper in g/m
Specify the color of the paper. This setting acts as an identifier to
display the color of the paper on the operator panel.
Specify the RGB color value (0-255) for identification purposes
on the operator panel.
Specify the type of paper (e.g., Vellum, Coated, Textured).
varioPRINT 135 Customer Expectations Document
varioPRINT 135 Customer Expectations Document
Description
2
or lb.
Page 66