Canon varioPRINT 135 Customer Expectation Document page 15

IMPORTANT
• Some type of finishing option (Finisher-AK1, Saddle Finisher-AK2, High Capacity
Stacker-E1, or High Capacity Stacker-G1) is required. The Finisher-AK1 cannot
be installed with the Saddle Finisher-AK2, and the High Capacity Stacker-E1
cannot be installed with the High Capacity Stacker-G1.
• The Duplex Color Image Reader-D1 and Color Image Reader-J1 cannot be
installed together.
• The Two-Knife Booklet Trimmer-A1 and SDD Square Fold Booklet-Maker with
Two-Knife Trimmer cannot be installed together.
• The Booklet Trimmer-D1 requires the Saddle Finisher-AK2.
• The Two-Knife Booklet Trimmer-A1 requires the Booklet Trimmer-D1 and Saddle
Finisher-AK2.
• The SDD Square Fold Booklet-Maker with Two-Knife Trimmer requires the
Booklet Trimmer-D1.
• The SDD Square Fold Booklet-Maker requires the Booklet Trimmer-D1.
• The Paper Folding Unit-F1 requires the Finisher-AK1 or Saddle Finisher-AK2.
• Two High Capacity Stacker-E1s can be attached to the machine at once.
• Two High Capacity Stacker-G1s can be attached to the machine at once.
• The PowerLift is used only with the High Capacity Stacker-G1.
• The SDD BLM300C Professional Booklet Maker requires the High Capacity
Stacker-G1 and the DFD 1,002 mm Kit, has several options that enhance the
booklet maker's finishing system, such as a 2-knife trimmer and square fold
device, and the BLM300C finishing system must be the final in-line accessory
attached to the machine.
• The only accessories that can be attached to the machine after the MAX Ring
Binder are the Canon Finisher-AK1 or Saddle Finisher-AK2, Booklet Trimmer-D1,
and Two-Knife Booklet Trimmer-A1. These options require pedestals to make the
feeding slots of the finishing accessories even with the output slot of the MAX
Ring Binder.
• The Decurler Unit-A1 must be attached immediately after the engine.
Version 13 varioPRINT 135 Customer Expectations Document
varioPRINT 135 Customer Expectations Document
Page 15