Status Lamp (Status); Drive Lamp (Drive); Test Status Lamp (Test); Lan Speed Lamp (Lan0, Lan1, Or Lan2) - Hitachi CE50-10 Instruction Manual

2. CE50-10 Names and Functions of Parts
2.1.8 STATUS lamp (STATUS)
This lamp indicates the operating status of the unit.
Table 2‒3: STATUS lamp (STATUS)
Lamp
Green
Red
Off
#: Cannot run without an OS.
2.1.9 Drive lamp (DRIVE)
This lamp indicates the access status of the disk.
Table 2‒4: DRIVE lamp (DRIVE)
Lamp
Green
Red
Off
#1: Cannot run without an OS
#2: This lamp lights red if a failure occurs in a disk other than a built-in SSD, for example, in a USB HDD.
2.1.10 TEST STATUS lamp (TEST)
This lamp indicates the operating status of the test tool. This lamp is lit only when the test tool is used.
Table 2‒5: TEST STATUS lamp (TEST)
Lamp
Solid green
Blinking green
Red
Off
2.1.11 LAN SPEED lamp (LAN0, LAN1, or LAN2)
This lamp indicates the link speed of the LAN.
Table 2‒6: LAN SPEED lamp (LAN0, LAN1, or LAN2)
Lamp
Green
Yellow
Off
14
Indicates that the OS is running.
Indicates that the BIOS is running, the OS is starting, or the unit stopped due to an error.
Indicates that the OS has stopped.
Indicates that the SSD is being accessed.
Indicates that the disk is in abnormal status.
Indicates that no access is made to the SSD.
Indicates that the test tool terminated normally.
Indicates that the test tool is running.
Indicates that the test tool terminated abnormally.
Indicates that the test tool is not used.
Indicates that the network is operating at 1000 Mbps.
Indicates that the network is operating at 100 Mbps.
Indicates that the network is operating at 10 Mbps or a link has not been established.
Description
#
Description
#1, #2
Description
Description