Hitachi CE50-10 Instruction Manual page 103

Example user name: edgeadm
login: edgeadm
Password: *******
3. Confirm that the OS operation mode is set to maintenance mode.
Run the showecmode command to confirm that the bold underlined parts are displayed as follows.
$ sudo showecmode
Current : Maintenance mode
Next : Maintenance mode
$
4. Connect the external media.
5. Mount the external media on /mnt/ecbackup_data.
$ sudo mount external-media /mnt/ecbackup_data
6. Run the restoration command.
Run the ecrestore command to save the backup files from the external media to the unit. The following
example shows how to run the ecrestore command.
• When the restoration menu appears, enter 1 (see the underlined part), and then press the Enter key to start
restoration.
$ sudo ecrestore
Please select a restore mode.
1. Restore from external media
2. Restore from maintenance PC
q. quit
> 1
• When restoration starts, a list of directories containing backup files stored in the external media appears. Enter
the number of the directory to be restored (see the underlined part), and then press the Enter key.
Backup directory list:
1. ecbackup_20210525101010
q. quit
> 1
• The progress of processing, restored file name, and processing time are displayed. Then, a message asking you
whether you want to verify the restored files appears. Enter y to verify the files or enter N to skip the
verification.
Making partitions finished
Restoring from extra media.
Restoring: 20210525101010_sda8_01.gz
31MiB 0:00:01 [16.1MiB/s] [====>
Will you verify restored area(y / N)?N <- Whether to verify files
Finished: 20210525101010_sda8_01.gz
(snip)
Successfully completed
• After running the command, wait for the command to terminate, displaying the Successfully complete
message.
If the command terminates displaying a message other than Successfully completed, the restoration
processing was interrupted due to an error. Take corrective action against the error, and then rerun the
restoration command.
7. Unmount the external media from the unit.
After restoration finishes, unmount the connected external media from the unit.
$ sudo umount /mnt/ecbackup_data
8. Remove the external media from the unit.
9. Reboot the unit.
$ sudo reboot
10. (No user operation required) Automatically log out from the unit.
5. Configuring Software Environment
<-Restore from external media.
<- Directory to be restored
] 25% ETA 0:00:02
87