Eclogsave - Hitachi CE50-10 Instruction Manual

5. Configuring Software Environment
Note
The messages are displayed in ascending order by date.
5.18.11 eclogsave
<Name>
eclogsave - Save overall maintenance information.
<Format>
eclogsave [ -d logtype ] directory-name
<Description>
Specify the full path name for directory-name.
This command stores collected log files, each of which is given a compressed file name YYYYMMDDhhmmss-
eclog.tgz, under the directory specified by the argument. This command also creates and stores a file
(YYYYMMDDhhmmss-eclog.list) that contains a list compressed files (YYYYMMDDhhmmss: Overall log
collection start time).
Note
Under some conditions, the following message may be displayed when eclogsave failed to run some
commands to correct log files.
eclogsave will correct available log files and export .tgz file. If you got .tgz file, eclogsave worked to the last.
If you can't find correct .tgz file, please re-try to run eclogsave after stoppping your applications.
<Options>
No option specified:
All log data of the log type specified by the -d option are collected.
-d logtype
Log data of the log type specified for logtype is saved.
To specify multiple log types, separate each type by a comma (,). You can specify the following values for
logtype.
• 1
System log collection target files compressed to tgz format are collected.
• 2
Memory dump data in the memory dump area to tgz format (maximum of 100 MB) is collected.
• 3
Log data registered in the user definition file (/hitachi/etc/save_applog.def) is compressed to
tgz format and collected.
• 4
System information that exists when the batch collection command is run is compressed to tgz format and
collected.
directory-name
Specify the directory in which the collected log files are to be stored. Specify a directory that has sufficient free
space for storing the collected log files.
<Diagnosis>
For the exit code, 0 is returned if the status is normal and 1 is returned if an error is detected.
2 is returned if eclogsave failed to run some command.
Table 5‒38: List of eclogsave command error messages below shows error messages that are output when an
error is detected.
120
eclogsave: command execution error. (XXXX)
eclogsave: Failed to create log files corretly.