Hitachi CE50-10 Instruction Manual page 113

CTRL-EDGEN-IMG model-name
<Inactive>(/dev/sda2)
CTRL-EDGEN-IMG model-name
<BIOS>
version-information
<RAS MCU F/W>
version-information
<TPM>
version-information
$
4. Send the update files from the maintenance PC to a path on the unit (for example, /mnt/osupdate).
• Files to be sent
OS file: osprog_base.zip
OS version information file: OSverinfo
• Destination directory: /mnt/osupdate
• When using Tera Term
Click File, and then SSH SCP to display the Secure File Copy screen.
In the bottom of the screen, enter the path to the backup file for From, and enter the path to the save
destination for To.
Click the Receive button.
• When using the scp command
Run the following command.
$ sudo scp user-name@IP-address:file-path /mnt/osupdate
5. Run the OS update command.
Run the ecosupdate command to update the OS in the inactive area and switch the system area that will be the
active area the next time the unit starts to the area containing the updated OS.
$ sudo ecosupdate /mnt/osupdate
6. Check the OS version and partition of the active area to be started next.
Run the rxosenable command with the -p (next startup area display) option specified. Then, confirm that the
partition to be started next has changed to the current inactive area, and the OS version of that inactive area is
updated (see the bold underlined parts).
$ sudo rxosenable -p
OS(version-number) is enabled. (/dev/sda2)
7. Reboot the unit.
$ sudo reboot
8. (No user operation required) Automatically log out from the unit.
Wait for the system to restart.
9. Check the communication between the maintenance PC and the unit.
Run the ping command to confirm that the maintenance PC can communicate with the unit.
$ ping IP-address-of-the-target-unit
10. Remotely log in to the unit from the maintenance PC.
Remotely log in to the unit.
Example user name: edgeadm
login: edgeadm
Password: *******
11. Run the version display command to check the OS versions of the active area and inactive area.
Run the showecmode command to confirm that the OS operation mode is Normal mode (see the bold
underlined parts).
version-information
version-information
5. Configuring Software Environment
97