Siemens EX8 LX6 Series Instruction Manual page 50

Home Connect
en
Symbol Function
WLAN signal strength
•'ˆ
Not connected to home network (WLAN).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
Connection to Home Connect server
•'‰
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The setting is only displayed if the appliance is
•'ƒ
■
connected to the home network.
The setting is only displayed if the appliance
•'„
■
has once connected to a network.
The setting is only displayed if an update is
•'†
■
available.
The setting is only displayed if Customer
•'‡
■
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
The and
•'ˆ •'‰
■
there is a connection to WLAN.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‚
Set the value on the control panel.
‹
4.
This deactivates Wi-Fi; the
control panel.
50
settings are only displayed if
symbol for four seconds.
0
•'„
symbol will go out on the
D
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
„
Set the ‹ value on the control panel.
4.
This disconnects the appliance from your home
network; the D symbol will go out on the control panel.
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‹
On the control panel
4.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions as per ~ "Automatic
5.
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
symbol for four seconds.
0
•'‚
symbol for four seconds.
0
•'‚
value or
‚
value.
ƒ