Check the cookware and the cooking results
™‚ƒ
‹
Not suitable
‚
Not perfect
ƒ
Suitable
Configuring activation of the flexible cooking zone
™‚„
‹
As two independent cooking zones.
‚
As a single cooking zone.*
™‚...
Connecting the wireless cooking sensor to the hob
‹
Connected correctly
‚
Not connected correctly: Transmission error.
ƒ
Not connected correctly: Temperature sensor fault.
Setting air recirculation mode or air extraction mode
™‚ˆ
‹
Configuring air recirculation mode.*
‚
Configuring air extraction mode.
Setting the automatic start
™‚‰
‹
Switched off.
‚
Switched on: Automatic mode with sensor control.*
ƒ
Switched on: The ventilation system starts at a power level in accordance with the relevant power levels for the cooking zones.
Setting sensor sensitivity for the ventilation system
™‚Š
‚
Lowest sensor sensitivity setting.
ƒ
Medium sensor sensitivity setting.*
„
Highest sensor sensitivity setting.
Setting the run-on
™ƒ‹
‹
Switched off.
‚
Switched on: Automatic function with sensor-controlled run-on.
ƒ
Switched on*:
If the hob is working in air extraction mode, the ventilation system switches itself on for approx. six minutes at power level
If the hob is working in circulating-air mode, the ventilation system switches itself on for approx. 30 minutes at power level
The run-on function automatically switches off after this time.
Automatic pot detection
™ƒ†
‹
Deactivated: Select the required cooking zone manually.
‚
Activated: The hob detects the size and the position of the pot and selects the corresponding cooking zone(s)*.
Home Connect
•'
~ "Home Connect settings"
Restore to standard settings
™‹
‹
Individual settings.*
‚
Restore factory settings.
*Factory setting
**The hob's maximum power output is shown on the rating plate.
--------
Basic settings
en
„
.
‚
.
45